How to operate the garbage truck correctly

Garbage trucks are very common in our daily lives, but many operators are not very familiar with the use of garbage trucks, and there may be some incorrect usage methods. Over time, this may cause a decrease in the performance of garbage trucks, affecting their work efficiency. Therefore, it is important to master the correct operation of garbage trucks. So, how to operate garbage trucks correctly? Let's learn about it together below!

When stepping on the pedal, do not press down quickly to the bottom. At the beginning of releasing the pedal, there is a certain distance between the clutch plate and the flywheel, which can be quickly released. When the flywheel comes into contact with the clutch plate, the speed should be slowed down to gradually increase the torque. When the clutch plate rotates synchronously with the flywheel, the clutch pedal should be released quickly.

Regularly clean and maintain hydraulic oil. Always keep an eye on the usage status of hydraulic oil. If it becomes cloudy or blackened, it must be replaced. When changing the oil, make full use of the oil filter to prevent debris from being brought into the tank during vibration.

The lifting and returning operations of the cargo compartment must be completed while the oil pump is running, and it is necessary to avoid allowing the cargo compartment to compress the oil cylinder back to its original position due to its own weight. Because this will cause hydraulic oil to overflow from the oil tank.

Drivers should be careful of their standing position when loading garbage, and not accidentally stick garbage to their bodies. After loading, they should check if it is sealed properly to avoid garbage leakage caused by poor sealing during the process. Put safety first. It is not allowed to carry out maintenance in the cargo compartment without using safety support poles, as this poses a significant risk.

Please remember the above steps, safe driving is related to both you and me.